SR02008SE
Installation of a Tech Tools 369/500 bubble window in accordance with Brim Aviation Master Drawing List number BR600-010, revision NC, dated June 1, 2009, or later FAA-approved revision. This modification must be maintained in accordance with Brim Aviation Instructions for Continued Airworthiness number BR600-008, revision N/C, dated June 17, 2009, or later FAA-accepted revision. Held by Brim Aviation, which holds 6 approved modifications in all. Last revised June 19, 2009. System: airframe structure.
What it applies to
- Kind of product
- Aircraft
- Design holder
- MD Helicopter Inc.
- Models
- 600N
- Type certificate
- H3WE
- On this site
- Md Helicopters Inc 600 12 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.