47-47-10: Float Strut Rework
FAA order 47-47-10 is an airworthiness directive. The FAA's subject line: Float Strut Rework. System: landing gear.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- Sky Enterprises, Inc.
- Models
- RC-3
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (415 characters)
47-47-10 REPUBLIC: (Was Mandatory Note 13 of AD-769-2.) Applies to Model RC-3 Aircraft.
Compliance required prior to February 1, 1948.
To prevent possible float strut failures during rough water landings, install wing reinforcing angles 17W21028, float strut brace assemblies 17W22013, spacers 17W22011 and lugs 17W22010.
(Republic Service Bulletin No. 19 dated September 9, 1947, covers this same subject.)
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/47-47-10.json · aircraft systems.