47-25-03: Nose Gear Drag Link
FAA order 47-25-03 is an airworthiness directive. The FAA's subject line: Nose Gear Drag Link. System: landing gear.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- Superior Aircraft Company
- Models
- V
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (419 characters)
47-25-03 CULVER: (Was Mandatory Note 5 of AD-778-2.) Applies Only to Serial Numbers V-1 to V-130, Inclusive.
Compliance required prior to August 15, 1947.
Inspect the nose gear drag link for the type of connection used to attach the aft fitting. The 3/4-inch diameter tube must butt the aft fitting. If otherwise, replace the link or rework accordingly.
(Culver Service Bulletin No. 1 covers this same subject.)
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/47-25-03.json · aircraft systems.