FAA orders · airworthiness directive · historical

2023-26-04: Engine Bleed Air System

FAA order 2023-26-04 is an airworthiness directive in force since February 7, 2024. The FAA's subject line: Engine Bleed Air System. It names the Rolls-Royce Deutschland TRENT 1000-K3, Rolls-Royce TRENT 1000, Rolls-Royce TRENT 1000-D3 engines: about 16 aircraft on the U.S. register today across them, though an order usually covers particular versions or serial numbers rather than every one. System: engine.

What it applies to as the FAA lists it

Kind of product: Engine
Makes: Rolls-Royce Deutschland Ltd & Co KG
Models: Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3, Trent 1000-Q3, Trent 1000-R3
Engine series: Rolls-Royce Deutschland TRENT 1000-K3 1 aircraft
Rolls-Royce TRENT 1000 14 aircraft
Rolls-Royce TRENT 1000-D3 1 aircraft

Dates and paperwork

In force since: February 7, 2024
Published: January 3, 2024 (signed December 21, 2023)
Docket: FAA-2023-1892
Replaced by: 2026-10-21
Status: Historical
The FAA's document: Read the order on the FAA's site

The FAA's summary their words, unchanged

The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Model Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000- P3, Trent 1000-Q3, and Trent 1000-R3 engines. This AD is prompted by a determination that certain intervals for visual inspection of the intermediate-pressure stage 8 (IP8) and high-pressure stage 3 (HP3) air transfer tubes and front bearing housing IP8 air feed tubes need to be reduced. This AD requires initial and repetitive visual inspections of the IP8 and HP3 air transfer tubes and front bearing housing IP8 air feed tubes for cracking, damage, or air leakage wear, and replacement, if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.

The order itself the regulatory text, as published

Show the full text (4,462 characters)

1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. 2. The FAA amends § 39.13 by adding the following new airworthiness directive: 2023-26-04 Rolls-Royce Deutschland Ltd & Co KG: Amendment 39-22647; Docket No. FAA-2023-1892; Project Identifier MCAI-2023-00626-E. (a) Effective Date This airworthiness directive (AD) is effective February 7, 2024. (b) Affected ADs None. (c) Applicability This AD applies to Rolls-Royce Deutschland Ltd & Co KG Model Trent 1000-AE3, Trent 1000-CE3, Trent 1000-D3, Trent 1000-G3, Trent 1000-H3, Trent 1000-J3, Trent 1000-K3, Trent 1000-L3, Trent 1000-M3, Trent 1000-N3, Trent 1000-P3, Trent 1000-Q3, and Trent 1000-R3 engines. (d) Subject Joint Aircraft System Component (JASC) Code 7500, Engine Bleed Air System. (e) Unsafe Condition This AD was prompted by a determination that certain intervals for visual inspection of the intermediate-pressure stage 8 (IP8) air transfer tubes, high-pressure stage 3 (HP3) air transfer tubes, and front bearing housing IP8 air feed tubes need to be reduced. The FAA is issuing this AD to prevent failure of the IP8 and HP3 air transfer tubes and front bearing housing IP8 air feed tubes. The unsafe condition, if not addressed, could affect the engine internal cooling and sealing flows, resulting in failure of the IP8 air transfer tubes, HP3 air transfer tubes, and front bearing housing IP8 air feed tubes, with consequent damage to the engine and reduced control of the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Required Actions Except as specified in paragraph (h) of this AD: Perform all required actions within the compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2023-0087, dated April 26, 2023 (EASA AD 2023-0087). (h) Exceptions to EASA AD 2023-0087 (1) Where EASA AD 2023-0087 refers to its effective date, this AD requires using the effective date of this AD. (2) This AD does not adopt the Remarks paragraph of EASA AD 2023-0087. (i) Alternative Methods of Compliance (AMOCs) (1) The Manager, AIR-520 Continued Operational Safety Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the AIR-520 Continued Operational Safety Branch, send it to the attention of the person identified in paragraph (j) of this AD and email to: ANE-AD-AMOC@faa.gov . (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. (j) Additional Information For more information about this AD, contact Sungmo Cho, Aviation Safety Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; phone: (781) 238-7241; email: sungmo.d.cho@faa.gov . (k) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise. (i) European Union Aviation Safety Agency (EASA) AD 2023-0087, dated April 26, 2023. (ii) [Reserved] (3) For service information identified in this AD, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; phone: +49 221 8999 000; email: ADs@easa.europa.eu; website: easa.europa.eu . You may find this EASA AD on the EASA website at ad.easa.europa.eu . (4) You may view this service information at FAA, Airworthiness Products Section, Operational Safety Branch, 1200 District Avenue, Burlington, MA 01803. For information on the availability of this material at the FAA, call (817) 222-5110. (5) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit: www.archives.gov/federal-register/cfr/ibr-locations or email: fr.inspection@nara.gov . Issued on December 21, 2023. Caitlin Locke, Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2023-28861 Filed 1-2-24; 8:45 am]BILLING CODE 4910-13-P

Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of October 8, 2026. Connections as data: /graph/directive/2023-26-04.json · aircraft systems.