Special Conditions: Boeing Model 787-8 Airplane; Crashworthiness
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published September 25, 2007 for Boeing. System: airframe structure.
What it applies to
- Applicant
- Boeing
- Makes
- Boeing
- Models
- —
- Published
- September 25, 2007
- Effective
- October 25, 2007
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
The FAA issues these special conditions for the Boeing Model 787-8 airplane. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These novel or unusual design features are associated with carbon fiber reinforced plastic used in the construction of the fuselage. For these design features, the applicable airworthiness regulations do not contain adequate or appropriate safety standards for impact response characteristics to ensure survivable crashworthiness. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing standards. We will issue additional special conditions for other novel or unusual design features of the Boeing Model 787-8 airplanes.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.