Special Conditions; Extra-Flugzeugbau GmbH Model 300 Series Airplanes
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published September 8, 1992 for Extra Flugzeugbau. System: airframe structure.
What it applies to
- Applicant
- Extra Flugzeugbau
- Makes
- Extra Flugzeugbau
- Models
- —
- Published
- September 8, 1992
- Effective
- October 6, 1992
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
This special condition is being issued for the Extra-Flugzeugbau GmbH Model 300 Series airplanes. These airplanes will have novel and unusual design features when compared to the state of technology envisaged in the airworthiness standards for normal, utility, acrobatic, and commuter category airplanes. These design features include the use of composite materials for primary structure for which the regulations do not contain adequate or appropriate airworthiness standards and structural design criteria utilizing higher design load factors, because the design flight envelope of the Extra 300 far exceeds the minimum required design limits of part 23. This special condition contains the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that provided by the current airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.
