Skewed Roller

No failure report names the skewed roller. 9 FAA approvals let 3 companies make a replacement skewed roller, Goodrich Corporation holding the most (5).

Approved replacement parts 9 parts manufacturer approvals

A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a skewed roller and sell it as an approved part for the models named. These are the companies holding such approvals for a skewed roller:

Goodrich Corporation 5 Trw Aeronautical Systems Lucas Aerospace 2 Lucas Aerospace Cargo Sys 2

For these models most: Boeing 777 (5), Boeing 767 (4), Boeing 747 (3), Boeing 757 (2), Boeing 737 (2).

Maker	Part	Replaces	Fits	Granted	Status
Goodrich Corporation	Skewed Roller Assembly 90656	Boeing P/N 90656	Boeing 777-200 Series, 777-300 Series,...	2005-09-08	current
Goodrich Corporation	Skewed Roller Assembly 90650	Boeing P/N 90650	The Boeing Company 747-400 Series, 747-400D Series,...	2004-03-19	current
Goodrich Corporation	Skewed Roller Assembly 90650	Boeing P/N 90650	The Boeing Company 737-600 Series, 737-700 Series,...	2004-03-19	current
Goodrich Corporation	Skewed Roller Assembly 90650	Boeing P/N 90650	The Boeing Company 767-200 Series, 767-300 Series,...	2004-03-19	current
Goodrich Corporation	Skewed Roller Assembly 90650	Boeing P/N 90650	The Boeing Company 777-200 Series, 777-300 Series	2004-03-19	current
Trw Aeronautical Systems Lucas Aerospace	Skewed roller 90656	90656	Boeing 777-200 Series, 777-300 Series	2001-04-22	current
Trw Aeronautical Systems Lucas Aerospace	Skewed roller 90650	90650	Boeing 737-600 Series, 737-700 Series,...	2001-04-22	current
Lucas Aerospace Cargo Sys	Skewed roller 90656	Boeing 90656	Boeing 767-200, 300	1997-11-18	current
Lucas Aerospace Cargo Sys	Skewed roller 90650	Boeing 90650	Boeing 747-400, 757-200, 777-200	1997-11-18	current

Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.