Input Pinion
0 failure reports named the input pinion in the last ten years, 7 since 1996. 2 FAA approvals let 2 companies make a replacement input pinion, Pacific Gear Systems, INC holding the most (1).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1996 | 1 |
| 1997 | 3 |
| 1998 | 3 |
Approved replacement parts 2 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a input pinion and sell it as an approved part for the models named. These are the companies holding such approvals for a input pinion:
For these models most: Md Helicopters Llc 369 (1), Md Helicopters Inc 500 (1), Agusta A109 (1), Agusta Spa A109 (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Pacific Gear Systems, INC | Input Pinion PG369-25121 | 369D25121-11 | MD Helicopters LLC 369D, 369E, 369F 369FF | 2024-12-31 | current |
| Goodrich Corporation | Input Pinion Drive Shaft - Engine Output 19E283-3A | 109-0415-06-103 | Agusta A109E, A109S | 2006-11-27 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.