Endplate
0 failure reports named the endplate in the last ten years, 3 since 1995. 5 FAA approvals let 4 companies make a replacement endplate, Airweld INC holding the most (2).
Reports by year
Reports by year, as a table
| reports | |
|---|---|
| 1995 | 3 |
Approved replacement parts 5 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a endplate and sell it as an approved part for the models named. These are the companies holding such approvals for a endplate:
For these models most: Boeing 737 (3), Mcdonnell Douglas DC-9 (2).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Gemini Engineering | ENDPLATE 69-35560-1 | 69-35560-1 | Boeing 737-100 Series, 737-200 Series,... | 2009-11-15 | current |
| Gemini Engineering INC | ENDPLATE 69-35560-1 | 69-35560-1 | Boeing 737-100 Series, 737-200 Series,... | 2009-11-15 | current |
| Spirit Aerosystems INC | ENDPLATE 69-35560-1 | 69-35560-1 | Boeing 737-100 SERIES, 737-200 SERIES,... | 2009-09-24 | current |
| Airweld INC | Endplate, Door AW5958775-141 | Douglas 5958775-141 | McDonnell Douglas DC-9-10, -20, -30 | 1996-08-25 | current |
| Airweld INC | Endplate, Door AW5958775-189 | Douglas 5958775-189 | McDonnell Douglas DC-9-10, -20, -30 | 1996-08-25 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.