The U.S. aircraft register, updated daily
Approved modifications · supplemental type certificate · current · amended

ST10657SC-D

Assist Handle Installation Installations in accordance with Data List Report No. F00-01013 Revision J dated April 7, 2011, or later FAA approved revision. Instructions for Continued Airworthiness, Report ICA-F00-01013-501/503, revision Original, dated 25-Jan-2011 or later FAA approved revision is required for installations after to April 2011. Maintenance Manual Supplement, Report 38235, revision A, dated 23-July-2008 or later FAA approved revision is required for installations prior to April 2011 for F00-01013 installation 501. Instructions for Continued Airworthiness, Report ICA-F00-01013-503, revision Original, dated 28-Sep-2009 or later FAA approved revision is required for installations prior to April 2011 for F00-01013 installation 503. Held by Dassault Falcon Jet CORP., which holds 74 approved modifications in all. Last revised April 13, 2011. System: other and general.

What it applies to

Kind of product
Aircraft
Design holder
Dassault Aviation; Dassault Aviation
Models
Falcon 900EX, FALCON 2000EX
Type certificates
A46EU, A50NM
On this site
Dassault FALCON 2000 485 registered
Dassault FALCON 900 277 registered
The FAA's record
On the FAA's site

What an approved modification is

A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.

Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.