ST02010LA
Installation of a Kollsman General Aviation Vision System in a Cessna Model 550 airplane in FAA-Approved U.S. Technical Master Drawing List 4627-34-000, Revision B, dated February 25, 2007, or later FAA approved revision. FAA-Approved Airplane Flight Manual Supplement Number U10-0160, Revision "NC," dated March 7, 2077 or later FAA-approved revision is required as a part of this installation. Held by Sierra Industries INC, which holds 34 approved modifications in all. Last revised September 7, 2010. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Cessna Aircraft Company
- Models
- 550
- Type certificate
- A22CE
- On this site
- Cessna 550 Citation II 500 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.