ST01153NY-D
Installation of Eaton Corporation control/annunciator panel. These STCs must be installed prior to installation of this STC: ST1433CE (Bendix King KFC/200 Flight Control System) and SA2058CE-D (Aileron Servo Disable Switch Installation). Held by Aerographics INC., which holds 3 approved modifications in all. Last revised May 27, 2003. System: flight controls.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company; The Cessna Aircraft Company
- Models
- TR182, R182
- Type certificates
- 3A13, 3A13
- On this site
- Cessna R182 Skylane RG 706 registered
Cessna TR182 Turbo Skylane RG 465 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 22, 2026.