SR01210NM
Fabrication of AMC AM369D23670 horizontal stabilizer tip plates in accordance with AMC Master Drawing List No. AMC-004, Revision C, dated March 25, 2003, or later Federal Aviation Administration (FAA) approved revision. The tip plates must be installed in accordance with AMC Installation Instructions MI-02001, Revision IR, dated November 6, 2002, or later FAA approved revision. Held by Aerometals, which holds 54 approved modifications in all. Last revised March 1, 2005. System: airframe structure.
What it applies to
- Kind of product
- Aircraft
- Design holder
- MD Helicopter Inc.
- Models
- 369D
- Type certificate
- H3WE
- On this site
- Md Helicopters Llc 369 34 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.