SH8681SW
Installation of a pilot/copilot seat back shroud with area for flight manual on the Eurocopter Canada MBB Model BO-105LS A-3 helicopters in accordance with Era Aviation, Inc., drawing list 10525-1000, Rev. B, dated 8/5/93, or later FAA approved revision. Held by Apical Industries INC, which holds 39 approved modifications in all. Last revised December 29, 2006. System: cabin, seats and restraints.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Eurocopter Canada Limited
- Models
- BO 105 LS A-3
- Type certificate
- H6NE
- On this site
- Messerschmitt-Bolkow-Blohm BO 105 20 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 7, 2026.