SA6073NM
Installation of fatigue sensor and structural life extension of wing spar in accordance with FAA approved SIE Master Drawing List 91000, Revision A, dated September 23, 1993, or later FAA approved revision, and FAA approved Airplane Flight Manual Supplement Report No. SIE-12-601, Revision N/C, dated October 19, 1993 or later FAA approved Airplane Flight Manual Supplement, and Report No. SIE-12-602, Revision N/C, dated December 21, 1993, or later FAA approved Revision. (SIE-12-601 is for model C99 only, and SIE-12-602 is for the remaining models, 99, 99A, A99A, and B99.). Held by Structural Integrity Engineering, which holds 23 approved modifications in all. Last revised December 29, 2003. System: airframe structure.
What it applies to
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.