SA00770CH
Replace front 30 inches of fiberglass canopy top with L.P. Aero Plastics Inc. acrylic top in accordance with Reabe Aircraft Improvement Inc. Installation Instructions as listed on AML No. SA00770CH, amended January 14, 2011, or later FAA approved revisions. Held by Reabe Aircraft Improvement INC, which holds 4 approved modifications in all. Last revised January 14, 2011. System: airframe structure.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Air Tractor Inc.; Air Tractor Inc.; Air Tractor Inc.; Air Tractor Inc.; Air Tractor Inc.; Air Tractor Inc.; Air Tractor Inc.
- Models
- AT-401, AT-402, AT-501, AT-502, AT-602, AT-301, AT-400
- Type certificates
- A17SW, A17SW, A17SW, A17SW, A19SW, A9SW, A9SW
- On this site
- Air Tractor Inc AT-301 84 registered
Air Tractor Inc AT-400 49 registered
Air Tractor Inc AT-401 68 registered
Air Tractor Inc AT-402 160 registered
Air Tractor Inc AT-502 501 registered
Air Tractor Inc AT-602 245 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.