The U.S. aircraft register, updated daily
FAA orders · airworthiness directive · historical

96-18-13: Fan rotor disk

FAA order 96-18-13 is an airworthiness directive in force since November 12, 1996. The FAA's subject line: Fan rotor disk. It names the Honeywell TFE-731-series, Honeywell TFE731-2, Honeywell TFE731-3, Honeywell TFE731-3AR, Honeywell TFE731-3B, Honeywell TFE731-3BR, Honeywell TFE731-3C, Honeywell TFE731-3CR, Honeywell TFE731-3D, Honeywell TFE731-3DR, Honeywell TFE731-3R, Honeywell TFE731-4R engines: about 345 aircraft on the U.S. register today across them, though an order usually covers particular versions or serial numbers rather than every one. System: engine.

What it applies to as the FAA lists it

Kind of product
Engine
Makes
Honeywell International Inc.
Models
TFE731-2, TFE731-2A, TFE731-3, TFE731-3A, TFE731-3AR, TFE731-3B, TFE731-3BR, TFE731-3C, TFE731-3CR, TFE731-3D, TFE731-3DR, TFE731-3R, TFE731-4R
Engine series
Honeywell TFE-731-series 291 aircraft
Honeywell TFE731-2 10 aircraft
Honeywell TFE731-3 5 aircraft
Honeywell TFE731-3AR 4 aircraft
Honeywell TFE731-3B 1 aircraft
Honeywell TFE731-3BR 1 aircraft
Honeywell TFE731-3C 10 aircraft
Honeywell TFE731-3CR 3 aircraft
Honeywell TFE731-3D 10 aircraft
Honeywell TFE731-3DR 3 aircraft
Honeywell TFE731-3R 2 aircraft
Honeywell TFE731-4R 5 aircraft

Dates and paperwork

In force since
November 12, 1996
Published
September 11, 1996
Docket
95-ANE-55
Replaced by
2001-23-09
Status
Historical
The FAA's document
Read the order on the FAA's site

The FAA's summary their words, unchanged

This amendment adopts a new airworthiness directive (AD), applicable to AlliedSignal Inc. (formerly Garrett Engine Division) TFE731 series turbofan engines, that requires removing certain fan rotor disks from service in accordance with a drawdown schedule, and would establish new fan rotor disk life limits. This amendment is prompted after additional analyses revealed that stress levels in the fan rotor disk dovetail slots for the applicable engine models are higher than initially calculated. The actions specified by this AD are intended to prevent uncontained failure of the fan rotor disk due to fatigue cracking in the dovetail slots, which can result in inflight engine shutdowns, severe secondary damage, and fan rotor assembly separation from the engine.

The order itself the regulatory text, as published

Show the full text (5,122 characters)
96-18-13 AlliedSignal Inc.: Amendment 39-9737. Docket 95-ANE-55. Applicability: AlliedSignal Inc. (formerly Garrett Engine Division) Models TFE731-2, -2A, -3, -3A, -3AR, -3B, -3BR, -3C, -3CR, -3D, -3DR, -3R, and -4R turbofan engines, installed on, but not limited to the following aircraft: Avions Marcel Dassault Falcon 10, 50, 100 series; Learjet 31, 35, 36, and 55 series; Lockheed-Georgia 1329-23 and -25 series; Israel Aircraft Industries 1124 series and 1125 Westwind series; Cessna Model 650, Citations III, VI, and VII; Raytheon British Aerospace HS-125 series; and Sabreliner NA-265-65. Note: This airworthiness directive (AD) applies to each engine identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For engines that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (d) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if the unsafe condition has not been eliminated, the request should include specific proposed actions to address it. Compliance: Required as indicated, unless accomplished previously. To prevent uncontained failure of the fan rotor disk due to fatigue cracking in the dovetail slots, which can result in inflight engine shutdowns, severe secondary damage, and fan rotor assembly separation from the engine, accomplish the following: (a) For engines equipped with fan rotor disks, part numbers (P/N's) 3072162-5, 3073436-5, 3073539-(All), and 3074529-(All), where (All) denotes any dash number, remove fan rotor disks from service and install a serviceable disk in accordance with the Accomplishment Instructions of AlliedSignal Engines Alert Service Bulletin (ASB) No. TFE731-A72-3569, dated May 31, 1995, as required by the following schedule: Fan Rotor Disk Cycles Since New (CSN) on the Effective Date of this AD Required Fan Rotor Disk Retirement (Remove From Service) 3,600 or less Not to exceed the new life limit of 4,100 CSN. 3,601 to 5, 500 Within the next 500 cycles after the effective date of this AD or prior to reaching 5,700 CSN, whichever occurs first. 5,501 or greater Within the next 200 cycles after the effective date of this AD, not to exceed 7,100 CSN. (b) For engines equipped with fan rotor disks, P/N 3072816-(All), where (All) denotes any dash number, remove fan rotor disks from service and install a serviceable disk in accordance with Accomplishment Instructions of AlliedSignal Engines ASB No. TFE731-A72-3570, dated May 31, 1995, as required by the following schedule: Fan Rotor Disk CSN on the Effective Date of this AD Required Fan Rotor Disk Retirement (Remove From Service)3,850 or less Not to exceed the new life limit of 4,600 CSN. 3,851 to 6,000 Within the next 750 cycles after the effective date of this AD, or prior to reaching 6,500 CSN, whichever occurs first. 6,001 or greater Within the next 500 cycles after the effective date of this AD, not to exceed 10,000 CSN. (c) A serviceable part is one that has not exceeded the life limits established by this AD. (d) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, Los Angeles Aircraft Certification Office. The request should be forwarded through an appropriate FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, Los Angeles Aircraft Certification Office. Note: Information concerning the existence of approved alternative methods of compliance with this airworthiness directive, if any, may be obtained from the Los Angeles Aircraft CertificationOffice. (e) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the aircraft to a location where the requirements of this AD can be accomplished. (f) The actions required by this AD shall be done in accordance with the following AlliedSignal Engines ASBs: Document No Pages Revision Date TFE731-A72-3569 1-8 Original May 31, 1995 Total Pages: 8. TFE731-A72-3570 1-8 Original May 31, 1995 Total Pages: 8. This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from AlliedSignal Aerospace, Attn: Data Distribution, M/S 64-3/2101-201, P.O. Box 29003, Phoenix, AZ 85038-9003; telephone (602) 365-2493, fax (602) 365-5577. Copies may be inspected at the FAA, New England Region, Office of the Assistant Chief Counsel, 12 New England Executive Park, Burlington, MA; or at the Office of the Federal Register, 800 North Capitol Street NW., suite 700, Washington, DC. (g) This amendment becomes effective on November 12, 1996.

Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of October 7, 2026. Connections as data: /graph/directive/96-18-13.json · aircraft systems.