93-22-09: Hydraulic Selector Valves
FAA order 93-22-09 is an airworthiness directive in force since December 16, 1993. The FAA's subject line: Hydraulic Selector Valves. System: heating, ice protection and utility systems.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- BAE Systems (Operations) Limited
- Models
- ATP
Dates and paperwork
- In force since
- December 16, 1993
- Docket
- 93-NM-57-AD
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (2,360 characters)
93-22-09 JETSTREAM AIRCRAFT LIMITED (formerly British Aerospace): Amendment 39-8733. Docket 93-NM-57-AD.
Applicability: All Model ATP airplanes, certificated in any category.
Compliance: Required as indicated, unless accomplished previously.
To prevent a gear-up landing, accomplish the following:
(a) Within 3,375 landings after the effective date of this AD, remove the hydraulic selector valves, part numbers AIR44880-5 and AIR44882-6, and install new, improved hydraulic selector valves, part numbers AIR46658-0 or AIR46660-0, as appropriate, in the emergency extension system for the landing gear, in accordance with AP Precision Hydraulics, Ltd., Service Bulletin AIR44880-29-02, Revision 1, dated March 9, 1993.
(b) An alternative method of compliance or adjustment of the compliance time that provides an acceptable level of safety may be used if approved by the Manager, Standardization Branch, ANM-113, FAA, Transport Airplane Directorate. Operators shall submit their requests through an appropriate FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, Standardization Branch, ANM-113.
NOTE: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Standardization Branch, ANM-113.
(c) Special flight permits may be issued in accordance with FAR 21.197 and 21.199 to operate the airplane to a location where the requirements of this AD can be accomplished.
(d) The removal and installation shall be done in accordance with AP Precision Hydraulics, Ltd., Service Bulletin AIR44880-29-02, Revision 1, dated March 9, 1993, which contains the specified effective pages:
Page Number
Revision Level
Shown on Page
Date
Shown on Page
1
1
March 9, 1993
2
Original
January 1993
This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR Part 51. Copies may be obtained from Jetstream Aircraft, Inc., P.O. Box 16029, Dulles International Airport, Washington, DC 20041-6029. Copies may be inspected at the FAA, Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
(e) This amendment becomes effective on December 16, 1993.
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/93-22-09.json · aircraft systems.
