59-10-01: Cabin Sidewalls
FAA order 59-10-01 is an airworthiness directive. The FAA's subject line: Cabin Sidewalls. It names Boeing 707: about 9 aircraft on the U.S. register today, though an order usually covers particular versions or serial numbers rather than every one. System: cabin, seats and restraints.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- The Boeing Company
- Models
- 707-100 Long Body, 707-100B Long Body, 707-100B Short Body
- On this site
- Boeing 707 9 registered
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (725 characters)
59-10-01\tBOEING: Applies to Boeing Model 707-100 Series Airplanes Registration Number N707PA Through N712PA, N70773, N7501A Through 7510A, N732TW Through N736TW. \n\tCompliance required by May 30, 1959. \n\tRemove lining trim strip 65-1910-10 and lining panels 65-1910-3 and -4 from left-hand and right-hand cabin sidewall panel installations. Install suitable plate of 0.032 gage aluminum alloy or 0.062 thick Royalite material on the left-hand and right-hand cabin sidewalls in vicinity of fuselage Station 196.5 such that left outboard and right outboard rudder pedals will have positive clearance throughout the full range of rudder pedal travel. \n\t(Boeing Service Bulletin NO. 298 Revision R-1 covers this subject.)
Related safety bulletins advice on the same designs, not orders
2014-11-24NM-15-03 · Flight Controls
2014-11-06NM-15-02 · Cabin Equipment/Furnishings
2007-03-14NM-07-19 · Freeplay of the outboard aileron tabs
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/59-10-01.json · aircraft systems.