57-14-02: Safety Belts
FAA order 57-14-02 is an airworthiness directive. The FAA's subject line: Safety Belts. System: other and general.
What it applies to as the FAA lists it
- Kind of product
- Appliance
- Makes
- Davis Aircraft Products, Inc.
- Models
- Safety Belts
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (1,066 characters)
57-14-02 DAVIS AIRCRAFT PRODUCTS (Safety Belts): Applies to Model FDC-1650 Belts, P/N FDC-1650, FDC-1650-27, FDC-1650-27M1. \n\n\tCompliance required as soon as possible but not later than August 15, 1957. \n\n\tSome of the release fittings of the subject belt assemblies are so constructed as to require one particular side of the fitting UP when being inserted in the buckle. \n\n\tIt is possible to improperly fasten the belts effected so that the buckle may become unfastened under load. The unsatisfactory release fittings have a tab bent up to an angle of approximately 11 degrees with the plane of the fitting (See Figure 1). \n\n\tTo provide for securely assembling the buckle with the release fitting in either position, the tab area indicated in the sketch must be removed or bent flush with the plane of the adjoining metal. \n\n\tThis rework applies only to the release fitting shown in the sketch. Other portions of the buckle assembly than that shown should not be modified. This condition has been corrected on all assemblies of current manufacture.
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/57-14-02.json · aircraft systems.