54-24-01: Antitorque Pedal Stops
FAA order 54-24-01 is an airworthiness directive. The FAA's subject line: Antitorque Pedal Stops. It names Bell 47: about 478 aircraft on the U.S. register today, though an order usually covers particular versions or serial numbers rather than every one. System: other and general.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- Scotts-Bell 47 Inc
- Models
- 47B, 47B3, 47D, 47D1, 47E, 47G
- On this site
- Bell 47 478 registered
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (486 characters)
54-24-01 BELL: Applies to All Models 47B, 47B3, 47D, 47D1, 47E, 47G Except 47G Serial Numbers 1286, 1287, 1294, 1295, and 1299 and Subsequent.
Compliance required no later than next 25-hour inspection.
In order to preclude improper installation of antitorque pedal assembly for dual controls, install two stop assemblies, P/N 47-722-165-1.
(Bell Mandatory Service Bulletin No. 98 dated October 29, 1954, covers this same subject and outlines the details for the installation.)
Related safety bulletins advice on the same designs, not orders
2001-02-09SW-01-13 ·
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/54-24-01.json · aircraft systems.