52-01-03: Damper Lever and Link
FAA order 52-01-03 is an airworthiness directive. The FAA's subject line: Damper Lever and Link. It names Bell 47: about 478 aircraft on the U.S. register today, though an order usually covers particular versions or serial numbers rather than every one. System: other and general.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- Scotts-Bell 47 Inc
- Models
- 47B, 47B3, 47D
- On this site
- Bell 47 478 registered
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (474 characters)
52-01-03 BELL: Applies to All Models 47B and 47B3 Helicopters and to Model 47D Helicopters Serial Numbers 1 to 100, Inclusive.
Compliance required at next 300-hour overhaul, but not later than March 1, 1952.
To provide lubrication to prevent seizing of the bearings, replace the existing damper lever and link assemblies (P/N 47-140-158 and -159) with the 47-140-158-1 lever and 47-140- 159-1 link assembly.
(Bell Service Bulletin No. 78 covers this same subject.)
Related safety bulletins advice on the same designs, not orders
2001-02-09SW-01-13 ·
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/52-01-03.json · aircraft systems.