52-01-01: Blade Grip Adapter Locks
FAA order 52-01-01 is an airworthiness directive. The FAA's subject line: Blade Grip Adapter Locks. It names Bell 47: about 478 aircraft on the U.S. register today, though an order usually covers particular versions or serial numbers rather than every one. System: other and general.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- Scotts-Bell 47 Inc
- Models
- 47B, 47B3, 47D, 47D1
- On this site
- Bell 47 478 registered
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (583 characters)
52-01-01 BELL: Applies to All Models 47B, 47B3, 47D Helicopters and to Model 47D1 Helicopters Serial Numbers 145 to 164, Inclusive.
Compliance required at next 300-hour overhaul, but not later than March 1, 1952.
To provide locks of increased tensile strength which will resist shearing should the blade grip adapters tend to loosen, remove the existing lockwire or blade grip adapter locks (P/N 47- 120-154-1), check the torque (3,000-3,300 inch-pounds) of the adapters and install revised locks (P/N 47-120-154-2).
(Bell Service Bulletin No. 76 covers this same subject.)
Related safety bulletins advice on the same designs, not orders
2001-02-09SW-01-13 ·
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/52-01-01.json · aircraft systems.