47-32-01: Stabilizer Damper Clamp
FAA order 47-32-01 is an airworthiness directive. The FAA's subject line: Stabilizer Damper Clamp. It names Bell 47: about 478 aircraft on the U.S. register today, though an order usually covers particular versions or serial numbers rather than every one. System: other and general.
What it applies to as the FAA lists it
- Kind of product
- Aircraft
- Makes
- Scotts-Bell 47 Inc
- Models
- 47B
- On this site
- Bell 47 478 registered
Dates and paperwork
- Docket
- Unknown
- Status
- Current
- The FAA's document
- Read the order on the FAA's site
The order itself the regulatory text, as published
Show the full text (409 characters)
47-32-01 BELL: (Was Mandatory Note 1 of AD-1H-1.) Applies Only to Model 47B Serial Numbers 2 Through 13.
Compliance required at next 100-hour inspection.
Rework the stabilizer damper frame clamp with a 1/16-inch saw cut, as shown in Bell Service Bulletin No. 47C7, revised June 12, 1947, in order to permit a clamping action which will prevent the loosening of the subject part of the main rotor mast.
Related safety bulletins advice on the same designs, not orders
2001-02-09SW-01-13 ·
Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/47-32-01.json · aircraft systems.