The U.S. aircraft register, updated daily
FAA orders · airworthiness directive · current

2024-24-07: Equipment/furnishings

FAA order 2024-24-07 is an airworthiness directive in force since January 13, 2025. The FAA's subject line: Equipment/furnishings. It names Bombardier CL-600 Challenger and CRJ: about 1,655 aircraft on the U.S. register today, though an order usually covers particular versions or serial numbers rather than every one. System: other and general.

What it applies to as the FAA lists it

Kind of product
Aircraft
Makes
MHI RJ Aviation ULC
Models
CL-600-2B19 (Regional Jet Series 100), CL-600-2B19 (Regional Jet Series 440)
On this site
Bombardier CL-600 Challenger and CRJ 1,655 registered

Dates and paperwork

In force since
January 13, 2025
Published
December 9, 2024 (signed November 21, 2024)
Docket
FAA-2024-0995
Status
Current
The FAA's document
Read the order on the FAA's site

The FAA's summary their words, unchanged

The FAA is adopting a new airworthiness directive (AD) for certain MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by a determination that the overhead bin attachment could fail under certain conditions. This AD requires replacing existing overhead bin hook assemblies and support tubes with a different type, as specified in a Transport Canada AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.

The order itself the regulatory text, as published

Show the full text (5,041 characters)
1. The authority citation for part 39 continues to read as follows: Authority: 49 U.S.C. 106(g), 40113, 44701. 2. The FAA amends § 39.13 by adding the following new airworthiness directive: 2024-24-07 MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.): Amendment 39-22897; Docket No. FAA-2024-0995; Project Identifier MCAI-2023-01075-T. (a) Effective Date This airworthiness directive (AD) is effective January 13, 2025. (b) Affected ADs None. (c) Applicability This AD applies to MHI RJ Aviation ULC (Type Certificate previously held by Bombardier, Inc.) Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes, certificated in any category, as identified in Transport Canada AD CF-2023-71, dated October 16, 2023 (Transport Canada AD CF-2023-71). (d) Subject Air Transport Association (ATA) of America Code 25, Equipment/furnishings. (e) Unsafe Condition This AD was prompted by a determination that the overhead bin attachment could fail under certain conditions. The FAA is issuing this AD to address a lack of forward load reaction capability during a high forward G emergency landing condition that could result in displacement of the overhead bins. The unsafe condition, if not addressed, could result in the overhead bins falling on the occupants and/or preventing access to emergency exits. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Requirements Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, Transport Canada AD CF-2023-71. (h) Exception to Transport Canada AD CF-2023-71 (1) Where Transport Canada AD CF-2023-71 refers to its effective date, this AD requires using the effective date of this AD. (2) Where Transport Canada AD CF-2023-71 refers to hours air time, this AD requires using flight hours. (3) Where the service information specified in Transport Canada AD CF-2023-71, specifies to "refer to AMM 25-23-01-400-805," for this AD, replace that text with " refer to AMM 25-23-01-400-805 or MHI RJ Reference Instruction Letter (RIL) 10059, Revision A, dated June 6, 2024." (i) Additional AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, send it to the attention of the person identified in paragraph (j) of this AD and email to: [email protected]. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office. (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or Transport Canada; or MHI RJ Aviation ULC's Transport Canada Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature. (j) Additional Information For more information about this AD, contact Fatin Saumik, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; email [email protected]. (k) Material Incorporated by Reference (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51. (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise. (i) Transport Canada AD CF-2023-71, dated October 16, 2023. (ii) [Reserved] (3) For Transport Canada material identified in this AD, contact Transport Canada, Transport Canada National Aircraft Certification, 159 Cleopatra Drive, Nepean, Ontario K1A 0N5, Canada; telephone 888-663-3639; email [email protected]. You may find this Transport Canada AD on the Transport Canada website at tc.canada.ca/en/aviation. (4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. (5) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations, or email [email protected]. Issued on November 21, 2024. Victor Wicklund, Deputy Director, Compliance & Airworthiness Division, Aircraft Certification Service. [FR Doc. 2024-28786 Filed 12-6-24; 8:45 am]BILLING CODE 4910-13-P

Related safety bulletins advice on the same designs, not orders

2021-09-16AIR-21-15R1 · Navigation System
2021-08-26AIR-21-15 · Navigation System
2020-03-18NM-20-03 · Landing Gear: Brake Control Valve
2019-02-19NE-19-03 · Escape Slide Maintenance Tasks and Intervals - JASC 2565
2011-08-30NM-11-51 · Ice and Rain Protection: Wing Anti-Ice System

Source: FAA Dynamic Regulatory System, airworthiness directives. The FAA's document is the authority; the register counts are this site's, from the FAA register of November 6, 2026. Connections as data: /graph/directive/2024-24-07.json · aircraft systems.