Special Conditions: TC Inter-Informatics A.S., Airbus Model A330-243 Airplane; Single-Occupant, Oblique (Side-Facing) Seats With Inflatable Lap Belts
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published August 29, 2022 for Airbus Sas. System: cabin, seats and restraints.
What it applies to
- Applicant
- Airbus Sas
- Makes
- Airbus SAS
- Models
- —
- Published
- August 29, 2022
- Effective
- August 29, 2022
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These amended special conditions are issued for the Airbus Model A330-243 series airplane, as modified by TC Inter-Informatics A.S. (TC Inter-Informatics). This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is single-occupant, oblique, B/E Aerospace Super Diamond seats, equipped with inflatable lap belts. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.