Special Conditions: Mitsubishi Aircraft Corporation Model MRJ-200 Airplane; Control Surface Position Awareness
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published April 21, 2019 for Mitsubishi Aircraft Corporation, covering the MRJ-200. System: flight controls.
What it applies to
- Applicant
- Mitsubishi Aircraft Corporation
- Makes
- Mitsubishi
- Models
- MRJ-200
- Published
- April 21, 2019
- Effective
- April 21, 2019
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These special conditions are issued for the Mitsubishi Aircraft Corporation (Mitsubishi) Model MRJ-200 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is a fly-by-wire electronic flight control system and no direct coupling from cockpit controller to control surface. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.