The U.S. aircraft register, updated daily
Special conditions · aircraft

Special Conditions: GDC Technics, Boeing Model 777-300ER Airplane; the Use of Single-Passenger Side-Facing Seats Equipped With Multiple Airbag Systems

Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published March 26, 2019 for Gdc Technics, covering the 777-300ER Series. System: cabin, seats and restraints.

What it applies to

Applicant
Gdc Technics
Makes
Boeing
Models
777-300ER Series
On this site
Boeing 777 358 registered
Published
March 26, 2019
Effective
March 26, 2019
The FAA's document
On the FAA's site

The FAA's summary their words, unchanged

These special conditions are issued for the Boeing Model 777- 300ER airplane. This airplane, as modified by GDC Technics, has novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature as modified by GDC Technics, will be equipped with nine single-passenger, side-facing seats, each of which will be installed with an upper torso restraint equipped with an airbag system and a floor level airbag system to limit the axial rotation of the upper leg, due to leg flail, of occupants in single-place, side facing divans. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.