Special Conditions: Embraer Model EMB-550 Airplanes; Flight Envelope Protection: Normal Load Factor (g) Limiting
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published May 7, 2019 for Embraer. System: flight controls.
What it applies to
- Applicant
- Embraer
- Makes
- Embraer
- Models
- —
- Published
- May 7, 2019
- Effective
- May 7, 2019
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These amended special conditions are issued for Embraer Model EMB-550 airplanes. This airplane will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is associated with an electronic flight control system that prevents the pilot from inadvertently or intentionally exceeding the positive or negative airplane limit load factor. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.
