Special Conditions; Beech Model 38P Series Airplanes
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published August 25, 1983 for Beech. System: engine.
What it applies to
- Applicant
- Beech
- Makes
- Beech
- Models
- —
- Published
- August 25, 1983
- Effective
- September 25, 1983
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These Special Conditions are issued to Beech Aircraft Corporation (Beech) to become a part of the type certification basis for the new single-engine, turbopropeller-powered, Beech Model 38P Series airplanes. These airplanes will have novel or unusual design features associated with a turbopropeller installation in a single-engine airplane for which the applicable airworthiness standards of Part 23 of the Federal Aviation Regulations (FAR) do not contain adequate or appropriate safety standards. These Special Conditions contain the additional safety standards which the Administrator of the FAA finds necessary to establish a level of safety equivalent to that provided in the regulations for single, reciprocating-engine-powered airplanes.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.