Special Conditions: AMSAFE, Incorporated; Adam Aircraft Industries Model A500; Inflatable Four-Point Restraint Safety Belt With an Integrated Airbag Device
Special conditions are rules the FAA writes for one design when the standard certification rules do not cover something new about it. These were published June 20, 2005 for Adam Aircraft. System: cabin, seats and restraints.
What it applies to
- Applicant
- Adam Aircraft
- Makes
- Adam Aircraft
- Models
- —
- Published
- June 20, 2005
- Effective
- June 7, 2005
- The FAA's document
- On the FAA's site
The FAA's summary their words, unchanged
These special conditions are issued to AMSAFE, Inc. for the installation of an AMSAFE, Inc., Inflatable Four-Point Restraint Safety Belt with an Integrated Airbag Device on the Adam Model A500. These airplanes, as modified by the installation of this Inflatable Safety Belt, will have novel and unusual design features associated with the upper-torso restraint portions of the four-point safety belt, which contains an integrated airbag device. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Source: FAA special conditions (final) from the Dynamic Regulatory System; the Federal Register carries the same notices.