Flap Slat
No failure report names the flap slat. 5 FAA approvals let 4 companies make a replacement flap slat, Eaton Aerospace LLC holding the most (2).
Approved replacement parts 5 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a flap slat and sell it as an approved part for the models named. These are the companies holding such approvals for a flap slat:
For these models most: Boeing 737 (2), Boeing 757 (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Eaton Aerospace LLC | Flap Slat Electronic Control Unit (FSECU) 1075D100-5 | V25W842311-009 | Gulfstream G150 | 2015-10-13 | current |
| Eaton Aerospace LLC | Flap Slat Electronic Control Unit (FSECU) 1075D100-5 | V25W842311-009 | Gulfstream G150 | 2015-06-08 | current |
| Avtech Tyee INC | Flap Slat Annunciator Panel 90-44201-2 | WCS 90-44201-2 (S231A219-2) | Boeing 737-600 Series, 737-700 Series,... | 2012-05-01 | current |
| Avtech Corporation | Flap Slat Annunciator Panel 90-44201-2 | WCS 90-44201-2 (S231A219-2) | Boeing 737-600 Series, 737-700 Series,... | 2008-04-23 | current |
| Eaton Aerospace Sterer Engineering | Flap & Slat Module 66790-1 | S251N404 | Boeing 757 | 2000-11-07 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.