Clamp Guide
No failure report names the clamp guide. 11 FAA approvals let 5 companies make a replacement clamp guide, Ontic Engineering & Manufacturing INC holding the most (5).
Approved replacement parts 11 parts manufacturer approvals
A parts manufacturer approval (PMA) lets a company other than the aircraft's maker make a clamp guide and sell it as an approved part for the models named. These are the companies holding such approvals for a clamp guide:
For these models most: Boeing 757 (6), Boeing 747 (6), Boeing 777 (4), Cessna 680 Citation Sovereign and Latitude (3), Cessna 560 Citation V, Ultra, Encore and Excel (3), Cessna 500 Citation I (3), Cessna 337 Skymaster (3), Cessna 336 (3), Cessna 310 (3), Beechcraft 95 Travel Air and Baron 55 (3), Beechcraft 58 Baron (1).
| Maker | Part | Replaces | Fits | Granted | Status |
|---|---|---|---|---|---|
| Aviation Materials Management INC | Clamp Guide 287N6104-3 | 287N6104-3 | Boeing 747-400 Series, 747-400D Series,... | 2013-03-25 | current |
| Aviation Materials Management INC | Clamp Guide 287N6104-3 | 287N6104-3 | Boeing 747-400 Series, 747-400D Series,... | 2010-10-25 | current |
| Gemini Engineering | CLAMP GUIDE 287N6104-3 | 287N6104-3 | Boeing 747-400 Series, 747-400D Series,... | 2009-11-15 | current |
| Gemini Engineering INC | CLAMP GUIDE 287N6104-3 | 287N6104-3 | Boeing 747-400 Series, 747-400D Series,... | 2009-11-15 | current |
| Goodrich Landing Gear | CLAMP GUIDE 287N6104-3 | 287N6104-3 | Boeing 747-400 SERIES, 747-400D SERIES,... | 2009-10-29 | current |
| Goodrich Landing Gear | CLAMP GUIDE 287N6104-3 | 287N6104-3 | Boeing 747-400 SERIES, 747-400D SERIES,... | 2009-10-29 | current |
| Ontic Engineering & Manufacturing INC | Clamp-Guide Tube 213140 | Modification Part | Cessna 310D, 310E, 310H | 2007-05-14 | current |
| Ontic Engineering & Manufacturing INC | Clamp-Guide Tube 213140 | Modification Part | Israel 1121, 1121A, 1121B | 2007-05-14 | current |
| Ontic Engineering & Manufacturing INC | Clamp-Guide Tube 213140 | Modification Part | Israel 1121, 1121A, 1121B | 2006-08-14 | current |
| Ontic Engineering & Manufacturing INC | Clamp-Guide Tube 213140 | Modification Part | Cessna 310D, 310E, 310H | 2006-03-13 | current |
| Ontic Engineering & Manufacturing INC | Clamp-Guide Tube 213140 | Modification Part | Cessna 310D, 310E, 310H | 2006-01-30 | current |
Sources: the FAA's service difficulty reports since 1995 (a report is a part that failed and was fixed, as filed by an airline, repair station or owner; the count shows reporting as much as reliability) and the parts manufacturer approvals in the FAA's Dynamic Regulatory System. The part name is the reporters' and the approval holders' own words, reduced to the first plain words so that spellings meet.