ST03552NY
Installation of Replacement Spoiler Servo Actuator Housing and Assemblies for OEM Part numbers A44700-007 and A44700-009 with 3 Point Machining & Aerospace (3PMA) Part Number A44700-009-3PMA. Held by 3 Points Machining & Aerospace (Canada). Last revised May 5, 2017. System: flight controls.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.; Bombardier Inc.
- Models
- DHC-8-101, DHC-8-102, DHC-8-103, DHC-8-106, DHC-8-201, DHC-8-202, DHC-8-301, DHC-8-311, DHC-8-315
- Type certificates
- A13NM, A13NM, A13NM, A13NM, A13NM, A13NM, A13NM, A13NM, A13NM
- On this site
- Boeing Of Canada/Dehav Div DHC-8 6 registered
Bombardier DHC-8 Dash 8 and Q400 58 registered
Dehavilland DHC-8 28 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.