ST02938NY
Master Data List, Document Number 8175-MDL Revision O, dated March 11, 2011 and seat installation drawing 8175-2522-2190, Revision I, dated March 11, 2011. Configuration B: Installation of Executive Interior and Satellite Television Antenna in accordance with BaySys Technologies, LLC Master Data List, Document Number 8175-MDL Revision O, dated March 11, 2011 and seat installation drawing 8175-2522-2199, Revision I, dated March 11, 2011. Configuration A and B: The following BaySys Technologies documents are required for this installation: a. Airplane Flight Manual Supplement, document number 8175-AFMS Revision IR, FAA approved March 14, 2011. b. The aircraft must be maintained in accordance with Instructions for Continued Airworthiness, document number 8175-ICA, Revision F, dated November 4, 2010, and Maintenance Manual Supplement, document number 8175-MMS Revision A, dated October 29, 2010. (See Continuation Sheet 2 of 2). Held by Interad Limited LLC, which holds 6 approved modifications in all. Last revised June 1, 2011. System: cabin, seats and restraints.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Airbus
- Models
- A340-213
- Type certificate
- A43NM
- On this site
- Airbus A340 10 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.