ST02106SE-D
Installation of an interior reconfiguration on Boeing Model 747-400 series aircraft in accordance with Jamco America, Inc. Master Drawing List (MDL) MDL1278-1, Revision B, dated April 28, 2011, or later Federal Aviation Administration (FAA) approved revision. Held by Jamco America INC, which holds 163 approved modifications in all. Last revised June 1, 2011. System: cabin, seats and restraints.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Boeing Company
- Models
- 747-400 Series
- Type certificate
- A20WE
- On this site
- Boeing 747 192 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.