ST01891SE-D
Installation of an interior reconfiguration on Boeing Model 777-200 series aircraft in accordance with Jamco America, Inc., Master drawing List (MDL) MDL1477-1, Rev. D, dated April 15, 2010, or later Federal Aviation Administration (FAA) approved revision. Held by Jamco America INC, which holds 163 approved modifications in all. Last revised June 14, 2010. System: cabin, seats and restraints.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Boeing Company
- Models
- 777-200 Series
- Type certificate
- T00001SE
- On this site
- Boeing 777 358 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.