ST01625LA
Modification of Wing Inboard and Outboard Aft Trailing Edge Flaps in accordance with FAA Approved AeroTech Services, Inc. Master Drawing List No. 52-0001, Revision C, dated May 20, 2003, or later FAA Approved Revisions. (for Model 737-200, -200C and -300 Series airplanes), and FAA Approved AeroTech Services, Inc. Master Drawing List No. 52-0001, Revision E, dated January 6, 2005, or later FAA Approved Revisions. (for Model 737-400 and 500 Series airplanes.). Held by Avmod, LLC. Last revised May 31, 2018. System: flight controls.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Boeing Company; The Boeing Company; The Boeing Company; The Boeing Company; The Boeing Company
- Models
- 737-200 Series, 737-200C Series, 737-300 Series, 737-400 Series, 737-500 Series
- Type certificates
- A16WE, A16WE, A16WE, A16WE, A16WE
- On this site
- Boeing 737 2,893 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 21, 2026.