SR03923AT
Installation of Aeronautical Accessories Lighting and Vision Accessories. This installation will be in accordance with DER Services Master Data List MDL-A2009-095-1, Rev-C, dated June 27, 2011, or later FAA approved revisions, and Aeronautical Accessories Drawing List AA-10080 Lighting/Vision Accessories Rev-H, dated June 21, 2011, or later FAA approved revisions. Any of the following kits can be installed individually or in any combination. Preflight Lighting Kit per Installation Instructions AA-10093, Rev-C, dated 6/17/11, or later FAA approved revisions. Courtesy Lighting Kit per Installation Instructions AA-10029, Rev-D, dated 6/21/11, or later FAA approved revisions. Baggage Compartment Light Kit per Installation Instructions AA-10032, Rev-C, dated 6/9/11, or later FAA approved revisions. Tail Rotor Camera Kit per Installation Instructions AA-10092, Rev-D, dated 6/13/11, or later FAA approved revisions. Held by Bell Helicopter Textron INC., which holds 366 approved modifications in all. Last revised August 23, 2011. System: rotorcraft systems.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Bell Helicopter Textron Canada Limited
- Models
- 407
- Type certificate
- H2SW
- On this site
- Bell 407 985 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.