SR02196AT
Manufacture of Flitestep /Floatstep in accordance with Aeronautical Accessories, Inc. Drawing List Report No. AA-98149, Revision C, dated August 31, 2000, or later FAA approved revisions, and installation per Aeronautical Accessories, Inc. Report AA-98150, Revision B, dated April 24, 2000, or installation per Aeronautical Accessories, Inc. Report AA-99093, Revision C, dated April 24, 2000, or installation per Aeronautical Accessories, Inc. Report AA-00011, Revision A, dated April 24, 2000, or later FAA approved revisions. Held by Bell Helicopter Textron INC., which holds 366 approved modifications in all. Last revised April 15, 2011. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Bell Helicopter Textron Canada Limited
- Models
- 427
- Type certificate
- R00001RC
- On this site
- Bell 427 13 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.