SB02984CH
Replace the Lindstrand Balloons Ltd Basket/Burner system and fuel tanks with the FireFly Balloons Basket Model 6072, S/N C007; the FireFly Balloons Burner Model T3-017, S/N 2666L and the FireFly Balloons Burner Model F1 Mirage, S/N 548; and FireFly Balloons fuel tanks, Part Number C6G001F, S/Ns 67844J, 69465J, 69586J, and 70385J, and Part Number C6G003I, S/Ns 67926J and 67936J. Replace the existing instruments with the Flytec Model Number 3040, S/N 11835/6837. The FireFly Balloons Basket/Burner is installed via the standard Lindstrand Balloons carabiner (snaplink) attachments as specified in the FAA Approved Balloon Flight Manual Supplement dated June 15, 2011. Held by Elevated Ballooning, which holds 2 approved modifications in all. Last revised June 17, 2011. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- Lindstrand Balloons Ltd.
- Models
- 180A
- Type certificate
- B82EU
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 21, 2026.