SA647SO
Installation of AIF partition class divider P/Ns 402-1, 402-2, 402-3, 402-4, and header assembly P/Ns403-1 and 404-1. (720C). Held by Aircraft Interior Fabricators, INC. Last revised July 16, 1968. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Boeing Company; The Boeing Company
- Models
- 707-300C, 720
- Type certificates
- 4A26, 4A28
- On this site
- Boeing 707 9 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.