SA646CE
Install wing and tail pneumatic deice kit 702A on 401/402 aircraft(S/N 0135 and above), kit 702B on414 aircraft and kit 702C on 401/402 aircraft (S/N 0001 through 0134 only). Held by Airborne Manufacturing CO, which holds 4 approved modifications in all. Last revised August 26, 1976. System: heating, ice protection and utility systems.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company
- Models
- 402B, 401, 401A, 401B, 402A, 414, 402
- Type certificates
- A7CE, A7CE, A7CE, A7CE, A7CE, A7CE, A7CE
- On this site
- Cessna 401 51 registered
Cessna 402 174 registered
Cessna 414 Chancellor 605 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.