SA5004NM
Installation of mixture control. Held by Acs Products CO, INC, which holds 4 approved modifications in all. Last revised December 23, 1991. System: other and general.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company; The Cessna Aircraft Company
- Models
- A150L, 150G, 150M, 150H, 150J, A150K, 152, 150F, A152, 150B, 150, 150K, 150A, 150C, 150D, A150M, 150E
- Type certificates
- 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19, 3A19
- On this site
- Cessna 150 7,993 registered
Cessna 152 1,637 registered
Cessna A150 232 registered
Cessna A152 48 registered - The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 20, 2026.
