SA10240SC
Modification of aft bench set in accordance with Capital Aviation Master Drawing List, MDL-CA-3196, Revision C, Dated 04-30-2004, or later FAA approved revision; maintained per the Capital Aviation Cessna Model 208, 208B Aft Bench Seat(s) Instructions for Continued Airworthiness, Revision Original Issue, Dated 04-28-04, or later FAA accepted revision; and use of Capital Aviation Aircraft Flight Manual Supplement for Cessna Model 208 and Model 208B Aft Seat Installation, dated June 21, 2004, or later FAA approved revision is required. Held by Capital Aviation INC, which holds 4 approved modifications in all. Last revised June 21, 2004. System: cabin, seats and restraints.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company; The Cessna Aircraft Company
- Models
- 208, 208B
- Type certificates
- A37CE, A37CE
- On this site
- Cessna 208 Caravan 1,019 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 21, 2026.