SA00137BO
Installation of Cessna exhaust system P/N 0750238-21, cabin heat shround P/N 0750161-82, and carburetor head shroud assembly p/n 0752657-1. Installation of STC SA09530SC required in conjunction with this STC. Approved ONLY for Cessna 182E, serial number 18254171. Held by Vermont Flying Service. Last revised April 27, 2005. System: engine.
What it applies to
- Kind of product
- Aircraft
- Design holder
- The Cessna Aircraft Company
- Models
- 182E
- Type certificate
- 3A13
- On this site
- Cessna 182 Skylane 11,832 registered
- The FAA's record
- On the FAA's site
What an approved modification is
A supplemental type certificate is the FAA's approval of a change to a certified design: a new engine or propeller, avionics, an autopilot, floats, a parachute, a larger fuel tank, an ice-protection kit. The company holding it may sell the kit and the paperwork to owners of the listed models; the modification then becomes part of that aircraft's record. The FAA's list says what was approved and for which models, not how many aircraft carry it.
Source: FAA supplemental type certificates (Dynamic Regulatory System). Register counts from the FAA register of October 22, 2026.