Peoa Private Heliport
UT60 · Peoa, Utah · Summit County · map
Peoa Private Heliport is a private heliport owned by Drd Aviation, LLC, 1 mile northwest of Peoa, Utah, 6,121 feet above sea level. Its landing pad, H1, is 40 by 40 feet of mats.
Private use: permission from the owner is required before landing here.
The airport
- Codes
- FAA UT60
- Kind
- Heliport · private use, permission required · privately owned
- Owner
- Drd Aviation, LLC
- Elevation
- 6,121 feet above sea level
- Control tower
- No control tower
- Repairs
- airframe: none; engine: none
- On the chart
- Salt Lake City sectional
- In the FAA's files since
- December 2020
Landing pad
For understanding the field, not for navigation.
| Pad | Length × width | Surface | Lights |
|---|---|---|---|
| H1 | 40 × 40 ft | Mats, good |
Radio frequencies
| Common traffic advisory (CTAF) | 122.9 |
Aircraft registered in Peoa from the FAA register
2 aircraft are registered to owners in Peoa, Utah: 1 helicopter, 1 business jet. Not every one of them is based at this heliport; the based-aircraft count above is the FAA's figure for this heliport alone.
Companies and organisations in town with two or more aircraft:
Individuals are counted, never named. All aircraft registered in Utah.
Accidents and incidents at or near this heliport NTSB records
No NTSB accident or incident records name this heliport.
Nearby within 30 nautical miles
The FAA's remarks as written in the airport file
- Charting requested in asp analysis.
- Tlof length 40 feet, width 40 feet. Fato length 70 feet, width 280 feet. Ingress/egress: 070/250 degrees. Elev HT of surface: 1 feet.
Facts from the FAA's airport file effective October 1, 2026, written out in plain English; weather from the National Weather Service's aviation weather service; registered aircraft from the FAA register as of October 5, 2026; accidents from the NTSB's public database. Owners are shown only when they are an organisation; no person is named. Check the official sources before a flight: this page is for understanding an airport, not for planning one.
