Beech C23 accident near Rawlins, Wyoming, February 18, 2012

The NTSB's narrative final · quoted from the NTSB record

The pilot reported that the takeoff roll was uneventful and that the airplane became airborne and accelerated to best-rate-of-climb speed; however, the airplane did not climb as expected. The pilot stated that the Federal Aviation Administration’s Airport/Facility Directory (AFD) warned of rising terrain off the departure end of the runway and instructed an immediate turn to the right. As a result, at the end of the runway and at an altitude of between 75 and 200 feet above the ground, the pilot began a right turn to the crosswind leg of the traffic pattern. However, the airplane stopped climbing, and he pitched up until the stall warning horn sounded. He said that he turned to the downwind leg of the traffic pattern, and the stall warning horn continued to “chirp.” The airplane began to descend and subsequently touched down in a sagebrush-covered field. The landing on rough terrain substantially damaged the airplane’s right wing spar and wrinkled the fuselage. Review of the AFD revealed that it did not warn of rising terrain off the departure end of the runway: however, it did request that “all aircraft departing runway 28 make right turnout as soon as safety permits after takeoff to avoid housing area and for noise abatement.” It is likely that as a result of the increased pitch attitude, the pilot did not maintain sufficient airspeed during the climb, as indicated by the stall warning horn sounding, and the airplane was unable to maintain altitude and descended to ground impact. The pilot indicated that he did not know if there was a preimpact mechanical malfunction.

The complete narrative as the NTSB published it. The NTSB's docket holds the report as a PDF and any photographs, statements and other documents from the investigation.