St. Mary'S Regional Medical Center Heliport
4AR0 · Russellville, Arkansas · Pope County · map
St. Mary'S Regional Medical Center Heliport is a private heliport in Russellville, Arkansas, 393 feet above sea level. Its landing pad, H1, is 44 by 44 feet of concrete.
Private use: permission from the owner is required before landing here.
The airport
- Codes
- FAA 4AR0
- Kind
- Heliport · private use, permission required · privately owned
- Elevation
- 393 feet above sea level
- Control tower
- No control tower
- Attended
- unattended
- Lights
- runway lights see the remarks below
- On the chart
- Memphis sectional
- Magnetic variation
- 4E
- In the FAA's files since
- May 1989
Landing pad
For understanding the field, not for navigation.
| Pad | Length × width | Surface | Lights |
|---|---|---|---|
| H1 | 44 × 44 ft | Concrete | Perimeter lights |
Aircraft registered in Russellville from the FAA register
45 aircraft are registered to owners in Russellville, Arkansas: 37 piston singles, 4 piston twins, 2 helicopters, 1 drone, 1 business jet. Not every one of them is based at this heliport; the based-aircraft count above is the FAA's figure for this heliport alone.
Companies and organisations in town with two or more aircraft:
Individuals are counted, never named. All aircraft registered in Arkansas.
Accidents and incidents at or near this heliport NTSB records
No NTSB accident or incident records name this heliport.
Nearby within 30 nautical miles
The FAA's remarks as written in the airport file
- Medical.
- Maximum gross weight for helicopters 12000 pounds.
- Rooftop.
- Marked with hospital logo.
Facts from the FAA's airport file effective October 1, 2026, written out in plain English; weather from the National Weather Service's aviation weather service; registered aircraft from the FAA register as of October 5, 2026; accidents from the NTSB's public database. Owners are shown only when they are an organisation; no person is named. Check the official sources before a flight: this page is for understanding an airport, not for planning one.
