The U.S. aircraft register, updated daily
Airports · Montana · heliport · FAA file effective October 1, 2026

Yellowstone Club Heliport

37MT · Ennis, Montana · Madison County · map

Yellowstone Club Heliport is a private heliport, 19 miles ese of Ennis, Montana, 7,600 feet above sea level. It has 2 landing pads.

Private use: permission from the owner is required before landing here.

The airport

Codes
FAA 37MT
Kind
Heliport · private use, permission required · privately owned
Elevation
7,600 feet above sea level
Control tower
No control tower
On the chart
Great Falls sectional
In the FAA's files since
February 2025

This airport's record at the FAA

Landing pads 2

H1H2N500 ft
Runways drawn to scale from the FAA's positions, north up.

For understanding the field, not for navigation.

PadLength × widthSurfaceLights
H140 × 40 ftConcrete
H240 × 40 ftConcrete

Aircraft registered in Ennis from the FAA register

26 aircraft are registered to owners in Ennis, Montana: 23 piston singles, 2 balloons, 1 piston twin. Not every one of them is based at this heliport; the based-aircraft count above is the FAA's figure for this heliport alone.

Individuals are counted, never named. All aircraft registered in Montana.

Accidents and incidents at or near this heliport NTSB records

No NTSB accident or incident records name this heliport.

Nearby within 30 nautical miles

The FAA's remarks as written in the airport file

  • Asn: 2024-ANM-4533-NRA
  • Tlof 40X40 feet; fato 322X72 feet; SA 362X112 feet; ingress/egress 090/090.
  • Tlof 40X40 feet; fato 322X72 feet; SA 362X112 feet; ingress/egress 090/090.

Facts from the FAA's airport file effective October 1, 2026, written out in plain English; weather from the National Weather Service's aviation weather service; registered aircraft from the FAA register as of October 5, 2026; accidents from the NTSB's public database. Owners are shown only when they are an organisation; no person is named. Check the official sources before a flight: this page is for understanding an airport, not for planning one.